Video

There is no picture or an unclear picture appears on the TV screen.

•Select the appropriate input using the input buttons.

•Set your TV to the appropriate input mode.

•Move your audio components away from the TV.

•Assign the composite video input to the DMPORT input correctly.

•Depending on the DIGITAL MEDIA PORT adapter video output may not be possible.

The source image input to the HDMI jack on the receiver is not output from the TV.

•Check the HDMI connection.

•Depending on the playback component, you may need to set up the component. Refer to the operating instructions supplied with each component.

Recording cannot be carried out.

•Check that the components are connected correctly.

•Select the source component using the input buttons.

Tuner

The FM reception is poor.

•Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna (aerial) as shown below. If you connect the receiver to an outdoor antenna (aerial), ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.

Outdoor FM antenna (aerial)

Receiver

ANTENNA

AM

Ground wire

 

(not supplied)

 

To ground

 

 

 

 

Radio stations cannot be tuned in.

 

• Check that the antennas (aerials) are

 

connected securely. Adjust the antennas

 

(aerials) and connect an external antenna

 

(aerial), if necessary.

 

 

• The signal strength of the stations is too

 

Additional

weak (when tuning in with automatic

 

tuning). Use direct tuning.

 

• Make sure you set the tuning interval

 

correctly (when tuning in AM stations

 

with direct tuning).

Information

stations (page 56).

• No stations have been preset or the preset

 

stations have been cleared (when tuning by

 

scanning preset stations). Preset the

 

• Press DISPLAY repeatedly on the receiver

 

so that the frequency appears on the

 

display.

 

RDS does not work.*

•Make sure that you are tuned to an FM RDS station.

•Select a stronger FM station.

continued

73GB