Sony STR-DG710 6:Selecting the speaker system, Inserting batteries into the remote, Tip, SP A, SP B, Note, 26GB, Notes, Light up, To select, SPEAKERS FRONT A terminals

Inserting batteries into the remote

Insert two R6 (size-AA) batteries in the RM-AAU015 remote commander. Observe the correct polarity when installing batteries.

Notes

•Do not leave the remote in an extremely hot or humid place.•Do not use a new battery with old ones.•Do not mix alkaline batteries and other kinds of batteries.

•Do not expose the remote sensor to direct sunlight or lighting apparatuses. Doing so may cause a malfunction.

•If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

•When you replace the batteries, the remote buttons may be reset to their factory settings. If this happens, reassign the buttons again (page 67).

Tip

Under normal conditions, the batteries should last for about 3 months. When the remote no longer operates the receiver, replace all the batteries with new ones.

6:Selecting the speaker system

You can select the front speakers you want to drive.

Be sure to use the buttons on the receiver for this operation.

SPEAKERS (OFF/A/B)

?/1

								MASTER VOLUME
	TUNING MODE						DISPLAY	INPUT MODE
	TUNING						INPUT SELECTOR
SPEAKERS
(OFF/A/B)
AUTO CAL MIC
	MEMORY/	DIMMER	SUR BACK	2CH	A.F.D.	MOVIE	MUSIC
	ENTER		SLEEP DECODING					AUTO CAL	DIRECT
VIDEO 3 IN/PORTABLE AV IN
PHONES
VIDEO	L AUDIO R

Press SPEAKERS (OFF/A/B) repeatedly to select the front speaker system you want to drive.

To select	Light up
The speakers connected to the	SP A
SPEAKERS FRONT A terminals
The speakers connected to the	SP B
SPEAKERS FRONT B terminals

To turn off the speaker output, press SPEAKERS (OFF/A/B) repeatedly until the “SP A” and “SP B” indicators on the display do not light up.

Note

You cannot switch the front speaker system by pressing SPEAKERS (OFF/A/B) when the headphones are connected to the receiver.

26GB