Changing the display

You can check the sound field, etc., by changing the information on the display.

Be sure to use the buttons on the receiver for this operation.

Press DISPLAY repeatedly.Each time you press the button, the display changes cyclically as follows.All inputs except the FM and AM bandIndex name of the inputa) t Selected inputtSound field currently appliedFM and AM band

Program Service nameb) or preset station namea) t Frequency t Program Type indicationb) t Radio Text indicationb) t Current Time indication (in 24-hour system mode)b) t Sound field currently applied

a)Index name appears only when you have assigned one to the input or preset station (page 57, 65). Index name does not appear when only blank spaces have been entered, or it is the same as the input name.

b)During RDS reception only (models of area code CEL, CEK only) (page 58).

Note

Character or marks may not be displayed for some languages.

Using the Sleep Timer

You can set the receiver to turn off automatically at a specified time.Press SLEEP repeatedly while the power is on.Each time you press the button, the display changes cyclically as follows:2-00-00t 1-30-00 t 1-00-00 t 0-30-00tOFFWhen sleep timer is activated, the display dims.

Note

If you press any buttons on the remote or receiver after the display dims, the display brightens up. After a while, the display dims again if no button is pressed.

Tip

To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears on the display. If you press SLEEP again, the sleep timer will be canceled.

66GB