109GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Right
STR-DN2010
4-182-049-11(1)

Adjusting Settings
3Press V/v repeatedly and to
uncheck the items you do not want to
measure, then press b.
The confirmation screen, asking whether
you are ready to start measurement,
appears.
4Press to select “Start”.
The measurement results is registered as
the position you selected in step 1.
5Repeat step 1 to 4 to register another
seating position.

To select the registered seating

position

Press V/v repeatedly to select the position
(Pos. 1, 2, 3) you want, then press .
The registered seating position is selected.

To name the seating position

You can rename the position name.
1Select the position (Pos. 1, 2, 3) you
want, then press .
2Press TOOLS/OPTIONS.
3Select “Name Input”, then press .
4Press V/v repeatedly to select a
character, then press b.
You can move the input position backward
and forward by pressing B/b.
5Repeat step 4 to input a character one
by one, then press .
The name you entered is registered.

Speaker Settings menu

You can adjust each speaker manually.
You can also adjust the speaker levels after the
Auto Calibration is completed.
Note
The speaker settings are only for the current seating
position.
Select “Speaker Pattern” according to the
speaker system which you are using. Select the
speaker pattern before you perform Auto
Calibration.
Lets you set the SPEAKERS SURROUND
BACK/FRONT HIGH/BI-AMP/FRONT B
terminals for a bi-amplifier or speakers front B
connection.
xOFF
xBI-AMP
xSPEAKER B
Note
When you change the connection from a bi-
amplifier or speakers front B to surround back or
front high speakers connection, set “Sur Back
Assign” to “OFF”, then set up the speakers again.
See “Auto Calibration” (page 42) or “Manual
Setup” (page 110).

Speaker Pattern

Sur Back Assign