Sony STR-DN2010 9, 10 , Enjoying the systems sound in another room, 1

98GB

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB05ENJ_STR-DN2010-CEL.fm masterpage: Left

STR-DN2010

4-182-049-11(1)

Notes

• Perform pairing within 5 minutes in step 7. If

you do not, pairing is recognized as failed,

and the screen changes accordingly. In this

case, see “If pairing fails” (page 98).

• When sound transmission is established,

“Pairing complete. To perform pairing to

another unit, select “Continue”.” appears.

9Press B/b repeatedly to select

“Finish” or “Continue”, then

press .

• “Finish”: Finishes pairing.

• “Continue”: Continues to perform

pairing to another S-AIR sub unit.

Tip

You can confirm the pairing completion or the

current ID by checking the “S-AIR Settings”

screen. “(Pairing)” appears beside the current

S-AIR ID.

10Press GUI MODE.

The GUI menu turns off.

Note

After you have performed pairing, if you select the

“S-AIR ID” menu, the ID setting (“A”, “B” or “C”)

that you last used is displayed.

If pairing fails

“Pairing failed. Retry?” appears.

To perform pairing again, select “Yes”.

To finish pairing, select “No”.

To quit pairing during setting

Press RETURN/EXIT O.

To cancel pairing

Perform the ID setting of the main unit

according to the procedure of “To set the ID of

the S-AIR main unit” (page 95). If you reset

the ID (even the same ID again), pairing is

canceled.

Enjoying the system’s

sound in another room

(For the S-AIR receiver only (not

supplied))

You can enjoy the system’s sound in another

room by using the S-AIR receiver. The S-AIR

receiver can be placed in another room for

enjoying the system’s sound there.

For details of the S-AIR receiver, refer to the

operating instructions supplied with the S-AIR

receiver.

1Set the ID of the S-AIR receiver

to match the ID of the S-AIR

main unit.

• To set the ID of the S-AIR main unit,

see “To set the ID of the S-AIR main

unit” (page 95).

• To set the ID of the S-AIR receiver,

refer to the operating instructions

supplied with the S-AIR receiver.

Notes

• When you are using another S-AIR sub unit,

such as a surround amplifier, do not change

the ID of the S-AIR main unit. Set the ID of

the S-AIR receiver to match the ID of the

S-AIR main unit.

• When you pair the S-AIR main unit and

another S-AIR sub unit, such as a surround

amplifier, you also need to pair the S-AIR

main unit and the S-AIR receiver. For details,

see “Pairing the S-AIR main unit with a

specific S-AIR sub unit (Pairing operation)”

(page 96).

GUI MODE

V/v/b,