Manuals / Brands / Home Audio / Stereo Receiver / Sony / Home Audio / Stereo Receiver

Sony STR-DN2010 Recording using the receiver, 1, 2, 3, 4, 1, 2, 3, 4

1 152

Download 152 pages, 10.7 Mb

60GB

D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB04GET_STR-DN2010-CEL.fm masterpage: Left

STR-DN2010

4-182-049-11(1)

Recording using the

receiver

You can record from a video/audio component

using the receiver. Refer to the operating

instructions supplied with your recording

component.

You can record onto a CD-R using the

receiver. Refer to the operating instructions

supplied with your CD recorder.

1Press one of the input buttons

to select the playback

component.

You can also use INPUT SELECTOR +/–

on the receiver.

2Prepare the playback

component for playing.

For example, tune to the radio station you

want to record (page 61).

3Prepare the recording

component.

Insert a blank CD-R into the CD recorder

and adjust the recording level.

4Start recording on the

recording component, then

start playback on the playback

component.

Note

Sound adjustments do not affect the signal output

from the SA-CD/CD/CD-R AUDIO OUT jacks.

1Press one of the input buttons

to select the playback

component.

You can also use INPUT SELECTOR +/–

on the receiver.

2Prepare the playback

component for playing.

For example, insert the video tape you

want to copy into the VCR.

3Prepare the recording

component.

Insert a blank video tape, etc. into the

recording component (connected to

VIDEO 1 OUT jacks) for recording.

4Start recording on the

recording component, then

start playback on the playback

component.

Recording onto a CD-R

V/v/B/b,

GUI MODE

Input

buttons Recording with a video

component

Contents

Main To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. For customers in the United States WARNING Owners Record Important Safety Instructions CAUTION For customers in Europe About This Manual On copyrights Page Table of Contents Connections Preparing the Receiver Basic Operations Tuner Operations BRAVIA Sync Features S-AIR Operations Other Operations Adjusting Settings Using the Remote Supplied accessories Inserting batteries into the remote Description and location of parts Front panel Indicators on the display x q z j9q;qaqsqdqg qfqh Page Rear panel 53 4 9 87 7 6 21 2 1 ADIGITAL INPUT/OUTPUT section Remote commander A B / cb)/C (RM-AAP056 only) Page To control other Sony components B D P F H Getting started 1: Installing the speakers Example of speaker system configuration 5.1 channel speaker system 7.1 channel speaker system using surround back speakers 7.1 channel speaker system using front high speakers Tips 2: Connecting the speakers Bi-amplifier connection 3: Connecting the TV To enjoy TV multi channel surround sound broadcasting from the speakers connected to the receiver Tips 4a: Connecting the video components HDMI features Connecting components with HDMI jacks AHDMI cable (not supplied) Notes on connecting cables Notes on HDMI connections If you want to connect several digital components, but cannot find an unused input Converting video signals Connecting components without HDMI jacks To connect a Blu-ray Disc player To connect a DVD player, DVD recorder AB Recommended connection Alternative connection To connect a satellite tuner, cable TV tuner To connect components with analog video and audio jack Function for conversion of video signals Notes on converting video signals To connect a recording component 4b: Connecting the audio components AAudio cord (not supplied) Notes on connecting DIGITAL MEDIA PORT adapter To detach the DIGITAL MEDIA PORT adapter from DMPORT jack 5: Connecting the antennas (aerials) 6: Inserting the wireless transmitter/transceiver To insert the wireless transmitter into the S-AIR main 1 2 3 7: Connecting to the network System requirements Configuration example 8: Connecting the AC power cord (mains lead) Initializing the receiver 1 2 then press ?/1 to turn on the Setting the speakers Selecting the speaker pattern 2 3 4 6 5 6 3 4 5 Setting the surround back speakers Press SPEAKERS repeatedly to select the front speaker system you want to drive. Calibrating the appropriate speaker settings automatically (Auto Calibration) Selecting the front speaker system 1 (page 40). 2 microphone to the AUTO CAL MIC jack. 3 2: Performing Auto Calibration 3 Auto Calibration, then press 4 Calibration Start, then press 5 1 step 7 in 2: Performing Auto Calibration (page 45), then 2 the calibration type, then press 3 Press V/v to select Warning in step 7 in 2: Performing Auto Calibration (page 45) then press When Error Code appears 1 2 Message list after Auto Calibration measurement Tip Configuring the network settings of the receiver 2 3 4 5 6 Preparing a computer to use as a server Operating System Computer What you can do with VAIO Media plus System Requirements 1 login as an administrator. 2 into the CD-ROM drive of your computer. 3 Guide to on-screen display operation 1 2 3 Using the menu 2 menu you want, then press or b to enter the menu. Using the option menus 3 4 5 To exit the option menu Playback 3 Naming the input (Name Input) 4 5 6 3 4 5 Enjoying sound/images from the components connected to the DIGITAL MEDIA PORT 2 press or b. 3 DMPORT or a component connected to the DIGITAL MEDIA PORT adapter, then 4 5 1 2 3 4 5 1 3 4 Operating the TDM-iP50 using the GUI menu of the receiver Selecting the playback mode xRepeat xShuffle 1 PORT adapter you want on the Music or Video screen, then press or b. 3 DMPORT Control, then press 4 Using the Sleep Timer Press AMP, then press SLEEP repeatedly while the power is on. Recording using the receiver 1 2 3 component Listening to FM/AM radio Tuner Operations 2 3 4 In case of poor FM stereo reception 2 3 4 5 If you cannot tune in a station 1 2 3 Presetting FM/AM radio stations (Preset Tuning) 1 3 4 5 Changing the AM tuning scale 1 2 1 3 4 5 Receiving RDS broadcasts Listening to Satellite Radio (USA model only) Connecting a satellite radio tuner Preparing to listen to a satellite radio Checking the ID number 2 3 1 3 4 Selecting a channel of the satellite radio 2 3 4 2 3 4 5 6 Selecting a channel by inputting the channel number directly (Direct Tuning) Presetting satellite radio channels 1 3 4 5 Restricting access to specific channels (Parental Lock) 1 lock using Category Mode (page 67) or Direct Tuning (page 68). 3 To listen to the locked channels 1 2 To cancel the Parental Lock 1 3 4 Satellite radio message list Selecting the sound field 2 channel sound mode Press SOUND FIELD +/ repeatedly to select the sound field you want. x2CH ST. (2ch Stereo) xA. DIRECT (2ch Analog Direct) Music mode xHP 2CH (Headphone (2ch)) xHP DIRECT (Headphone (Direct)) To turn off the surround effect for movie/music When headphones are connected Digital audio formats supported by the receiver Enjoying the surround effect at low volume levels (NIGHT MODE) Press NIGHT MODE to select NIGHT ON. Resetting sound fields to the initial settings 1 About the network functions of the receiver About DLNA Enjoying content stored on the server Using Network Features 2 3 4 5 To search the server 2 3 Registering your favorite content 1 Selecting the playback mode 2 3 1 2 3 Playing back content registered in My Library Using the remote to play back content Using a controller Enjoying content stored on the server 1 2 3 Listening to Rhapsody Setting an account Rhapsody Digital Music Service 2 3 11 12 To check the account information 1 2 3 4 1 2 3 4 5 6 7 1 1 2 Selecting a SHOUTcast station 3 Listening to SHOUTcast 5 Selecting preset stations Presetting favorite stations 1 2 Features of the Setup Manager application software Operating System Computer 1 System Requirements 1 from the support website on the computer to which you installed the Setup Manager. 2 To check the HELP What is BRAVIA Sync? Preparing for the BRAVIA Sync 8 Playing back components with one-touch operation (One-Touch Play) Enjoying the TV sound from the speakers connected to the receiver (System Audio Control) Turning off the receiver with the TV (System Power-Off) Press TV, then press AV ?/1. Enjoying movies with the optimum sound field (Theater/Theatre Mode Sync) About S-AIR products S-AIR Operations Setting up an S-AIR product To set the ID of the S-AIR main 1 About environments where S-AIR products (S-AIR main unit and sub unit) are used Establishing sound transmission between the S-AIR main unit and S-AIR sub unit (ID setting) Pairing the S-AIR main unit with a specific S-AIR sub unit (Pairing operation) 1 2 3 4 5 9 Finish or Continue, then 10 If pairing fails To quit pairing during setting 2 3 4 5 6 Changing the channel for better sound transmission 2 Settings, then press or 3 S-AIR, then press . 5 the setting you want, then 6 7 OFF, select the ID so that sound transmission is most stable. Enjoying the S-AIR receiver while the S-AIR main unit is in standby mode 2 3 4 5 the setting you want. Switching between digital and analog audio (INPUT MODE) 1 Enjoying the sound/ images from other inputs (Input Assign) 2 Input, then press or b. 3 6 signals you want to assign to the input which you selected in step 3 using V/v/B/b. 7 Using a bi-amplifier connection 2 3 4 5 Using the Settings menu 2 Settings, then press or b to enter the menu mode. 3 the menu item you want, then Auto Calibration menu To register settings for the listening environment 1 2 Calibration Start Speaker Settings menu xBI-AMP xSPEAKER B Speaker Pattern Sur Back Assign To adjust the speaker level 1 Manual Setup 1 2 3 To adjust the size of each 1 the speaker on the screen you want to adjust, then press . 2 the value, then press . 2 Page xSTD Distance Unit xMAX Surround Settings menu To select the sound field 1 2 To adjust the effect level for Cinema Studio EX A/B/C 1 2 D.Range Comp (Dynamic range compression) EQ Settings menu To adjust the equalizer on the EQ screen 1 2 3 Audio Settings menu x0 ms 300 ms Page Video Settings menu You can make settings for video. Lets you convert the resolution of analog video input signals. Resolution (Converting video signals) HDMI Settings menu Audio Out Pass Through xTV+AMP xAMP Network Settings menu To check the network settings 1 2 To configure network settings automatically 1 2 External Control Controllers To cancel the setup Device Name To remove the detected controllers from the list 1 2 To assign the device name 1 2 System Settings menu Software Version To update the receiver using the menu 1 2 3 Operating without connecting to a TV 1 2 3 4 5 Using the menu in the display Adjusting Settings Overview of the menus Page Adjusting Settings Page To view the information on the display 1 2 Tuning radio stations 1 2 1 Presetting radio stations want to preset. Listening to the FM/AM radio 2 Listening to satellite radio 1 2 3 5 Selecting a preset channel 1 1 2 Presetting satellite radio channels Using the Remote 3 5 other components. To cancel programming To activate the input after programming To control a CD player To control a DAT deck To control a tape deck To control an MD deck To control an HDD recorder To control a Blu-ray Disc player/ recorder To control a PSX To control a DVD player To control a DVD/HDD COMBO To control a TV To control an LD player To control a Video CD player To control a VCR To control a satellite tuner (box) To control a cable box Clearing all the contents of the remotes memory 1 VOL (RM-AAP055 only) or 2 and hold ?/1, then press AV ?/1. 2 On placement On operation On cleaning On S-AIR function Troubleshooting General Audio Page Video HDMI Page S-AIR function Tuner Remote commander Network Error messages If the problem persist About support information Reference sections for clearing the receivers memory Additional Information Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (USA model only) FM tuner section Video section HDMI Video HDMI Video (3D) Supported playback formats Additional Information General Design and specifications are subject to change without notice. Halogenated flame retardants are not used in the certain printed wiring boards. Index Numerics A B C M N O P R