144GB
D:\NORM'S JOB\SONY HA\SO0071\STR-DN2010\GB\GB07ADD_STR-DN2010-CEL.fm masterpage: Left
STR-DN2010
4-182-049-11(1)
• Is the network controller listed on the
Controllers settings screen, and is the box
for “Permit” checked?
If the box is not checked, check the box for
“Auto Permission”, and return to the
menu. Then, operate the receiver using the
network controller once, and then uncheck
the box for “Auto Permission”.
• If the network controller is a computer
software controller, is the software filtered
by antivirus software or firewall software?
Permit UPnP communications between
the software and the receiver.
• Network controllers could be listed up to
10 on the “Controllers”. If the network
controller does not listed, remove some of
controller(s) and try again.
If the trouble is other than one of the cases
described above and the trouble is not solved
even if you wait for a while, perform either of
the operations below.
• Press ?/1 on the remote to turn the
receiver off and then on again.
• Hold down ?/1 on the receiver until the
white indicator flashes to reboot the
receiver.
If there is a malfunction, the display shows a
message. You can check the condition of the
system by the message. See the following table
to solve the problem. If any problem persists,
consult your nearest Sony dealer.
PROTECTOR
Irregular current is output to the speakers, or
upper panel of the receiver is covered with
something. The receiver will automatically
turn off after a few seconds. Check the
speaker connection and turn on the power
again.
For other messages, see “Message list after
Auto Calibration measurement” (page 48),
“DIGITAL MEDIA PORT message list”
(page 58) and “Satellite radio message list”
(page 72).
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
In the event of a problem with S-AIR function,
have a Sony dealer check the entire system
together (S-AIR main unit and S-AIR sub
unit).
Refer to the following web site for details of
the latest information on the receiver.
For customers in the United States:
http://www.sony.com/essupport
For customers in Europe:
http://support.sony-europe.com/quickjump/
STR
Error messages
If the problem persist
Reference sections for clearing
the receiver’s memory
To clear See
All memorized settings page 39
Customized sound fields page 77