Sony STR-DN610 Switching between digital and analog audio , 1, 2, Enjoying the sound/ images from other inputs, 2, 3, 4, 5, 6

55GB
D:\NORM'S JOB\SONY HA\SO0086\STR-DN610_PMRF 2\GB\GB08ADV_STR-DN610-U2.fm masterpage: Right
STR-DN610
4-167-824-13(1)
Advanced Operations
Switching between
digital and analog audio
(INPUT MODE)
When you connect components to both digital
and analog input jacks on the receiver, you can
fix the audio input mode to either of them, or
switch from one to the other, depending on the
type of material you intend to watch.
1Press INPUT SELECTOR +/– on
the receiver to select the input.
You can also use the input buttons on the
remote.
2Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
xAUTO
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
xANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the Analog Direct function is selected, audio
input is set to “ANALOG” automatically and you
cannot select other modes.
• When HDMI 1–
3 or DMPORT input is selected,
“------” appears on the display, and you cannot
select other modes. Select an input mode other than
the HDMI 1–
3 and DMPORT input, then set the
audio input mode.
Enjoying the sound/
images from other inputs
You can reassign audio and/or video signals to
another input when they are not currently
being used.
For example when you want to connect your
DVD player but cannot find an unused input:
1Press AMP MENU.
2Press V/v repeatedly to select
“AUDIO” or “VIDEO”, then
press or b.
3Press V/v repeatedly to select
“A. ASSIGN” or “V. ASSIGN”,
then press or b.
4Press V/v repeatedly to select
the input name you want to
assign (for example, “DVD”).
5Press or b to enter your
selection.
6Press V/v repeatedly to select
the input jack you want to
assign to the input which you
selected in step 4.
To return to the previous display
Press B.
Advanced Operations
?/1
DVD player
Receiver
To O PTICAL
SAT/CATV IN
jack (audio
signal)
To COMPONENT
VIDEO IN 1 jacks
(video signal)
Assign to DVD input jack
– using “A. ASSIGN” in
AUDIO menu
– using “V. ASSIGN” in
VIDEO menu
continued