Amplifier Operation

Selecting the component

1 Press input buttons to select the input.

To select the

Light up

VCR

VIDEO

 

 

DVD player

DVD

 

 

Satellite tuner

TV/SAT

 

 

Built-in tuner (FM/AM)

TUNER

 

 

The selected input appears in the display.

Tip

You can also use INPUT SELECTOR on the receiver.

2 Turn on the component and start playback.

Note

If you select the VCR or DVD player, set the TV’s video input to match the component you selected.

3 Press MASTER VOL + or MASTER VOL

– to adjust the volume.

Tip

You can also use MASTER VOLUME on the receiver.

Note

To avoid damaging your speakers, make sure that you turn down the volume before you turn off the receiver.

To mute the sound

Press MUTING.

The muting function will be canceled when you do the following.

•Press MUTING again.

•Turn the power off.

•Increase the volume.

Tip

You can also use MUTING on the receiver.

16GB

Listening to FM/AM radio

You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas to the receiver (see page 9).

Tip

The tuning scale is:

FM: 50 kHz

AM: 9 kHz

Automatic tuning

If you do not know the frequency of the station you want, you can let the receiver scan all available stations in your area.

1 Press TUNER repeatedly to select the FM or AM band.

The last received station is tuned in.

Tip

You can also use INPUT SELECTOR on the receiver.

2 Press TUNING + or TUNING –.

Press TUNING + to scan from low to high; press TUNING – to scan from high to low. The receiver stops scanning whenever a station is received.

Tip

If “STEREO” flashes in the display and the FM stereo reception is poor, press FM MODE to change to monaural (MONO). You will not be able to enjoy the stereo effect, but the sound will be less distorted. To return to stereo mode, press FM MODE again.