Remote

Operations

Function

Button

 

 

 

 

./> VCR/

Skips tracks.

7

CD player/

 

 

DVD player

 

 

 

 

m/M

CD player/

Searches tracks in the

8

DVD player

forward or backward

 

 

direction.

 

 

 

 

VCR

Fastforwards or rewinds.

 

 

 

H 9

VCR/

Starts playblack.

 

CD player/

 

 

DVD player

 

 

 

 

X q;

VCR/

Pauses playblack or

 

CD player/

record. (Also starts

 

DVD player

recording with

 

 

components in recording

 

 

standby.)

 

 

 

x w;

VCR/

Stops playback.

 

CD player/

 

 

DVD player

 

 

 

 

Notes

•The AUX button on the remote is not available for receiver operation.

•When you press the input buttons (VIDEO, DVD), the input mode of the TV might not switch to the corresponding input mode that you want. In this case, press the TV/VIDEO button to switch the input mode of the TV.

•To activate the buttons with orange printing, press ALT first before pressing the buttons.

•Some functions explained in this section may not work depending on the model.

•The above explanation is intended to serve as an example only. Therefore, depending on the component the above operation may not be possible or may operate differently than described.

Changing the factory setting of an input button

If the factory settings of the input buttons do not match your system components, you can change them. For example, if you have a CD player and you do not have a DVD player, you can assign the DVD button to your CD player.

1 Hold down the input button whose input you want to change (for example, DVD).

2 Press the corresponding button of the component you want to assign to the input button (for example, 1 – CD player).

The following buttons are assigned to select the input:

To operate

Press

CD player

1

 

 

VCR (command mode VTR 2*)

2

 

 

VCR (command mode VTR 3*)

3

 

 

DVD player

4

 

 

TV

5

 

 

DSS (Digital Satellite Receiver)

6

 

 

Tuner (this receiver)

7

 

 

DCS (Digital CS Tuner)

8

 

 

BSD (Digital BS Tuner)

9

 

 

Tuner (Component tuner)

0/10

 

 

*Sony VCRs are operated with a VTR 2 or 3 setting. These correspond to 8mm and VHS respectively.

Now you can use the DVD button to control the CD player.

To reset a button to its factory setting

Repeat the above procedure.

To reset all the input buttons to their factory setting

Press ?/1, AV ?/1 and MASTER VOL – at the same time.

U700-RM Remote the Using Operations

33GB