17
Hooking Up and Setting Up the Speaker System
Once you have hooked up the speakers and turned on the
power, clear the receiver’s memory. Then specify the
speaker parameters (size, position, etc.) and perform any
other initial setup operations necessary for your system.
Befor e turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the leftmost position (0).
• Selected the appropriate front speakers (see “e;
SPEAKERS selector” on page 28).
Clearing the receiver’s memory
Before using your receiver for the first time, or when you
want to clear the receiver’s memory, do the following.
1Turn off the receiver.
2Hold down ?/1 for 5 seconds.
The currently selected function appears in the display.
All of the following items are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset stations are cleared.
• The EQ BANK settings are cleared.
1/u
A
OFF
A+B
B
–+
010
19
8
7
2
3
6
5
4
1/u
+–
–+
Performing Initial Setup Operations
Performing initial setup operations
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system. You can adjust the following
items. For details on how to make adjustments, see the
page in parenthesis.
• Speaker size and placement (pages 18~21).
• Speaker distance (page 20).
• Selecting the 5.1CH video input (page 52).
• Digital power management (page 52).
• Video power management (page 52).
• Sound field link (page 52).
• Whether other components will turn on or off
automatically via the CONTROL A1 control system
(page 52).
• 2 way remote control system operation (page 53).
• Selecting the command mode (page 53).
• Selecting the color of the on-screen display (page 53).
Demonstration Mode
The demonstration is activated when you turn on the
system while pressing SET UP. When the demonstration
starts, the following message appears in the display twice:
“Now Demonstration Mode!! To finish the
demonstration, please push POWER KEY while this
message appears in the display. Thank you!”
To cancel the demonstration
Press ?/1 to turn the receiver off during the previous
message. The next time you turn the receiver on, the
demonstration will not appear.
To view the demonstration
Hold down SET UP and press ?/1 to turn on the power.
Note
Running the demonstration will clear the receiver’s
memory. For details on what will be cleared, see “Clearing
the receiver's memory” on this page.