Chapter 5: Operation
2.Switching to the CPU Port 23 of the slave matrix: <Left Shift>, <Left Shift>, <s>, <2>, <3>, <Enter>
NOTE: The selected master/slave mode is permanently activated until another mode is manually activated. This means that if you select <s> for example, all prospective commands will be sent to the slave, but not if the Command Mode is left in the meantime.
5.1.4 Function Keys <F1>–<F12>
In Command Mode you can retrieve the Macros
The deposited command sequence for the appropriate function key is executed and Command Mode is left immediately.
By using <s> or <S> and <m> or <M> before you key in other commands, you can select whether the command sequence should be executed for the master or the slave.
NOTE: The chosen control level remains selected only if the switch remains in Command Mode.
5.2 KVM Switching
To switch using the ServSwitch DKM FX, use OSD or Java:
Figure
Page 103 |