Chapter 5: Operation
To set a KVM connection between a console and a CPU,
To set a video connection between a console and a CPU,
NOTE: CPUs whose respective console does not have access rights will not appear in the list.
You can use the following button to perform a switching operation:
Table
Button Function
Send | Send effected switching operations to the matrix |
|
|
NOTE: By activating the function Auto Send in the left lower corner of the working area, switching operations will be done immediately without confirmation by pressing the Send button.
Additionally, the menu offers the possibility to get from any console or CPU into the associated configuration menu in the task area.
1.To get directly to Definition > CON Devices, use the right mouse button to click on the respective console in the list and select “Open CON Device.”
2.To get directly to Definition > CPU Devices, use the right mouse button to click on the respective console in the list and select “Open CPU Device.”
5.3 Serial Interface
Figure
The ServSwitch DKM FX enables you to switch via a serial interface
Detailed information for the serial interface and the corresponding switching commands can be found in Chapter 6.
Page 106 |