Chapter 4: Configuration
Select “Configuration > Save” in the main menu.
By selecting this menu item, the active configuration of the matrix is saved to the permanent matrix memory. By default, the last configuration that has been saved in this way will be restored after the matrix restarts.
NOTE: Changing or saving configurations blocks the matrix memory and freezes all OSD menus for a few seconds. The switching connections are not affected by this freeze.
If you select “Auto Save” within the system settings, it will automatically save the configuration periodically.
4.9.2 Saving Configurations (Internal)
In this menu, the current matrix configuration to predefined storage locations is saved. However, it does not replace configuration buffering.
You can access the menu via OSD or Java:
Figure
In Active, the name and detailed information of the current configuration are shown. This configuration can be saved now.
In Default and File #1 to File #8, the name and the detailed information of the respective saved configuration are shown. You can overwrite these storage locations.
The storage location to be overwritten by the current configuration must be selected explicitly.
Afterwards, the current configuration will be saved to this storage location and will be immediately shown in the menu. The previously saved configuration that was saved to this storage location is deleted.
OSD
You can save the created configuration within eight storage locations in the matrix (File
1.Select “Configuration > Save As…” in the main menu.
2.Select the required storage location “(File
Page 91 |
