Chapter 4: Configuration
Table 4-10. System data settings.
Field | Selection | Description | |
|
|
| |
Device | Text | Enter the device name of the matrix (default: SWITCH 01) | |
|
|
| |
Name | Text | Enter the name of the configuration that is used to save the current | |
settings (default: Standard) | |||
|
| ||
|
|
| |
Info | Text | Additional text field to describe the configuration (default: Factory | |
settings) | |||
|
| ||
|
|
| |
|
| If the matrix is defined as a slave in the OSD, the user will lose control | |
| Activated | automatically. Use the keyboard command <Shift><Shift><s><o>to | |
| recover control. The OSD will open again in the matrix defined as | ||
|
| ||
Slave |
| slave. | |
|
|
| |
| Deactivated | Function not active (default) | |
|
|
| |
| Activated | Save the current configuration of the matrix in the flash memory | |
| periodically. | ||
Auto Save |
| ||
|
| ||
| Deactivated | Function not active (default) | |
|
|
| |
|
| Send all performed switching commands in the matrix as an echo via | |
| Activated | serial interface. | |
Enable COM | NOTE: Enable this function when using media control via the serial | ||
| |||
echo |
| ||
| interface. | ||
|
| ||
|
|
| |
| Deactivated | Function not active (default) | |
|
|
| |
|
| Send all performed switching commands in the matrix as an echo via | |
| Activated | LAN connection. | |
Enable LAN | NOTE: Enable this function when using media control via the serial | ||
| |||
echo |
| ||
| interface. | ||
|
| ||
|
|
| |
| Deactivated | Function not active (default) | |
|
|
| |
| Activated | Synchronize the slave matrix according to the switch status of the | |
Synchronize | master matrix. | ||
| |||
|
| ||
|
|
| |
| Deactivated | Function not active (default) | |
|
|
| |
Master IP | Numerical value | Set the network address of the master matrix (default value: | |
address | 000.000.000.000) | ||
| |||
|
|
|
Page 60 |
