Chapter 7: Troubleshooting
7.4 Power Supply Units Malfunction
Table
Problem | Possible Cause | Solution |
|
|
|
ServSwitch DKM FX cannot be started
Power supply units not locked | Check the power supply unit’s lock and | |
correctly | ||
|
| |
No power supply is available | Check that cables for the power supply | |
are connected correctly | ||
| ||
|
| |
Power supply units are not | Check the slide to switch on the power | |
switched on | supply units |
7.5 Network Error
Table
Problem | Possible Cause | Solution |
|
|
|
Network settings are not resumed after editing
ServSwitch DKM FX restart is not | Restart the unit | |
yet completed | ||
|
7.6 ServSwitch DKM FX Failure
Table
Problem | Possible Cause | Solution | |
|
|
| |
Serial control is impossible | CPU and ServSwitch DKM FX | Adapt the baud rate in the | |
are running at a different baud | ServSwitch DKM FX and in the | ||
or restricted | |||
rate | CPU | ||
| |||
|
|
| |
Serial control via the | Wrong network cable | Use a | |
port is not possible | |||
|
|
Port definitions as USB 2.0 invalid
ServSwitch DKM FX restart not | Restart the ServSwitch DKM FX | |
yet completed | ||
|
Page 121 |