Chapter 4: Configuration
|
| Table | |
|
|
| |
Field | Selection | Description | |
|
|
| |
| Activated | The network settings are automatically supplied by a DNS server | |
| (default) | ||
DHCP |
| ||
|
| ||
| Deactivated | Function not active | |
|
|
| |
IP address | Byte | Input of the IP address in the form “192.168.1.1,” if DHCP is not active | |
|
|
| |
Subnet | Byte | Input of the subnet mask in the form “255.255.255.0,” if DHCP is not | |
Mask | active (default 255.255.255.0) | ||
| |||
|
|
| |
Gateway | Byte | Input of the subnet mask in the form “192.168.1.1,” if DHCP is not | |
active | |||
|
| ||
|
|
|
NOTE: To activate the modified network parameters, restart the ServSwitch DKM.
CAUTION: Consult your system administrator before modifying the network parameters. Otherwise, unexpected results and failures can occur in combination with the network.
OSD
Select “Configuration > Network” in the main menu.
Figure 4-25. Menu Configuration—Network screen.
Page 71 |