Chapter 4: Configuration
You can enter the OSD of the ServSwitch DKM FX:
•via keyboard connected to the CPU board
•via keyboard connected to a CON unit of an extender
Entering OSD
1.Start Command Mode with the hotkey (see Section 5.1).
2.Press <o> to open OSD. You will see a list of all available CPUs as a start menu.
3.Press <Esc> to enter the main menu.
Leaving OSD
•Press <Shift> + <Esc> simultaneously. The OSD will close without any further changes and the currently active CPU connection will display.
Menu Structure
Figure
The general layout of the OSD is structured into three areas:
•Upper status area
•Working area
Page 47 |