Chapter 4: Configuration
4. Configuration
4.1 Command Mode
The ServSwitch DKM FX has a Command Mode that enables several functions via keyboard command during normal use.
To enter Command Mode, use a hotkey sequence and to exit Command Mode, press <Esc>. While in Command Mode, the Shift and Scroll LEDs on the console keyboard will flash.
NOTE: In Command Mode, normal keyboard and mouse operation will cease. Only selected keyboard commands are available.
The following table lists the keyboard commands to enter and to exit Command Mode and to change the hotkey sequence:
Table
Function | Keyboard command |
|
|
Enter Command Mode (default) | 2x |
|
|
Exit Command Mode | <Esc> |
|
|
| |
Change hotkey sequence | Since 8/10/2011: |
| <current hotkey> + <c>, <new hotkey code>, <Enter> |
|
|
NOTE: <Key> + <Key> = Press keys simultaneously; <Key>, <Key> = Press keys successively, 2x <Key> = Press key quickly, twice in a row (similar to a mouse
You can change the hotkey sequence to enter Command Mode. The following table lists the hotkey codes for the available key sequences:
Page 45 |