Operating Instructions
Digital Display
The four display fields correspond to the four cooking zones, and give the following indications:
–
– ”0.“, when a cooking zone is selected,
– ”v“, when the Keep Warm setting is selected,
– ”1.“ to “9.“, depending on the selected Cook setting,
– ”A“ ,when Automatic Warm Up is on,
– ”H“, when Residual Heat is on,
– ”F“, if there is a fault.
1 Cooking Zone Safety Cut-out
| If one of the cooking zones is not switched off after a certain time or if | ||
| the heat setting is not changed, the corresponding cooking zone | ||
| switches itself off automatically. | ||
| h appears in the ring display for all rings that are switched on, and j | ||
| after they have cooled down. |
| |
| The rings are switched off at: |
| |
| • Heat setting | 1 - 2 | after 6 hours |
| • Heat setting | 3 - 4 | after 5 hours |
| • Heat setting | 5 | after 4 hours |
| • Heat setting | 6 - 9 | after 1.5 hours |
3 | If one or more cooking zones switch off before the times indicated see | ||
| section “What to do if …”. |
| |
Cancelling the Safety Cut-out
To cancel the activated safety
Switching Off for Other Reasons
Liquid that boils over onto the control panel causes all cooking zones to switch off immediately.
If you place a wet cloth on the control panel it has the same effect. In both cases the appliance has to be switched on again using the mains switch n after removing the liquid or cloth.
47
