Installation Instructions
Electrical Connection
| Before connecting, check that the nominal voltage of the appliance, |
| that is the voltage stated on the rating plate, corresponds to the avail- |
| able supply voltage. The rating plate is located on the lower casing of |
| the hob. |
| The heating element voltage is AC230 V ~. The appliance also works |
| perfectly on older networks with AC220 V ~. |
| The hob is to be connected to the mains using a device that allows the |
| appliance to be disconnected from the mains at all poles with a contact |
| opening width of at least 3 mm, eg. automatic line protecting cut- |
| out,earth leakage tripsorfuse. |
| A type |
| mains connecting cable. |
| The connection must be carried out as shown in the diagram. The con- |
| necting links should be fitted according to the appropriate connection |
| diagram. The earth lead is connected to terminal x. The earth lead |
| must be longer than leads carrying electric current. |
| The cable connections must be made in accordance with regula- |
| tions and the terminal screws tightened securely. |
| Finally, the connecting cable is to be secured with the mains cable cleat |
| and the covering closed by pressing firmly (lock into place). |
| Before switching on for the first time, any protective foil or stickers |
| must be removed from the glass ceramic surface. |
1 | Once connected to the mains supply check that all cooking zones are |
| ready for use by briefly switching each on in turn at the maximum set- |
ting.
72
