Residual Heat Indicator, Is a risk of burns | Electrolux C75301K

Operating Instructions

	Residual Heat Indicator
	When an individual cooking zone or the entire hob is switched off, any
	residual heat is shown with an h (for “Hot”) in the digital display for
	the appropriate cooking zones.
	Even after the cooking zone has been switched off, the residual heat
	indicator only goes out when the cooking zone is cold.
2	You can use the residual heat for melting and keeping food warm.
1	Important! As long as the residual heat indicator is illuminated, there
	is a risk of burns.
1	Important! If the power supply is interrupted the h symbol will also
	go out and information about residual heat will no longer be available.

However, it is still possible to burn yourself. This can be avoided by be- ing particularly attentive.

57

Image 21

Electrolux C75301K Residual Heat Indicator, Indicator only goes out when the cooking zone is cold, Is a risk of burns

Contents

C75301K Following symbols are used in the text Dear customerPlease read these operating instructions carefully Contents Page Electrical Safety SafetyChild Safety Please contact your local customer centre or your dealer Safety During Use Safety When CleaningSwitch off the cooking zones after use To Avoid damaging your appliance Disposing of the packaging material DisposalInformation on disposal Appliance must not be disposed of with household rubbish Key Features of Your Appliance Description of the hob Cancelling the Safety Cut-out Cooking Zone Safety Cut-outSwitching Off for Other Reasons Digital Display Initial Cleaning Before Using for the First TimeWipe the ceramic glass surface with a damp cloth Be damaged Operating the Hob Switching On the ApplianceTouch Control Sensor Field Function or the life of the appliance Cooking Zone Selection Switching Off the Appliance Heat Setting Selection + Cooking zone is finally switched offKeep Warm Switching the Casserole Zone On and Off Switching the Triple Ring Cooking Zone On and Off Operating Instructions Stop+Go Function Cooking zone display Switching off a Cooking Zone Residual Heat Indicator Indicator only goes out when the cooking zone is coldIs a risk of burns Cooking with the Automatic Warm up Function Switching off a cooking zone Lower setting, the warm up time ends at onceCooking without the Automatic Warm up Function Energy Timer Ending the timer function prematurely Using the timer to measure short periods of timeDisplaying the remaining cooking time Minute Minder Uses, Tables and Tips PansEnergy saving tips Automatic warm up function is suitable for Advice on Cooking with and without Automatic Warm upAutomatic warm up function is not suitable for General notes At an appropriate lower heat setting Typical Heat Settings Hob Cleaning and CareLight Soiling Stubborn Soiling Hob Frame Problem Dirt Rectifying faults What to do ifWhat do I do if Cooking zone cannot be switched on? Cooking zone cannot be switched off?Check whether Lock is activated Is shown in the display? Cut-out dimensions Technical Data Appliance dimensionsPower consumption Heating element voltage Regulations, Standards, Directives Safety Instructions for the Installer Tions and the terminal screws tightened securely Electrical Connection Installation Instructions Installation Instructions When do you incur costs even during the warranty period? Is it a technical fault? Assembly 117 Removal 119 Salvo modificaciones