CAUTION

If the following precautions are not observed, injury or property damage may occur.

Do not install any equipment other than the specified product.

•This Floor Stand is designed for use with the specified product only. If you install equipment other than specified, it may fall or break, and cause injury.

•Do not place objects such as vases, pottery, etc., on the Floor Stand.

•Do not modify the Floor Stand.

•Do not place anything hot directly on the Floor Stand. The heat may cause discoloration or deformation of the Floor Stand.

•Do not place anything directly on the Floor Stand that may damage the glass.

Be sure to secure the TV.

Secure the TV to the Floor Stand using the supplied lock screws. If the TV is not installed securely, it may fall or the Floor Stand may topple over, and cause injury.

Do not apply weight to the glass or subject it to any kind of impact.

Do not apply weight to the Floor Stand with your hand when installing the TV. Do not hit the Floor Stand with hard objects, such as a screwdriver, etc. The glass may break and cause injury.

When carrying the Floor Stand

Trying to move the Floor Stand alone, or without following the proper procedures, may cause injury. To avoid this, be sure to follow the advice given below.

•Be sure that two or more persons carry the Floor Stand, and only after removing the TV, connected equipment and glass shelves.

•Do not drag the Floor Stand. The base parts of the Floor Stand may come off and damage the floor.

•Be careful not to allow your hands or feet to be pinched under the bottom plate.

•Do not grab the glass shelf when carrying the Floor Stand.

Do not subject the glass to excessive shock.

This Floor Stand is made of tempered glass, but care should be taken.

If the glass breaks, glass fragments could cause injury, so observe the precautions below.

•Do not hit the glass or drop sharp-pointed objects on the

glass. Avoid excessive shock.

• Do not scratch or poke the glass with sharp-pointed objects.

•Do not let hard objects such as a vacuum cleaner hit the edges of the glass.

Note on carrying capacity

Do not place any equipment

 

 

 

 

 

 

 

 

 

 

 

 

 

which exceeds the maximum

 

 

 

 

 

 

 

 

 

 

 

 

 

weight for each shelf as

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

20

kg (44 lb 2 o

z)

indicated in the illustration.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Otherwise, the shelves may

 

 

 

 

30

kg

(66 lb

3

oz)

 

break.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes on installation

•When assembling, lay the packing materials on the floor to avoid damage to the floor.

•Install the Floor Stand on a solid and flat floor. Do not allow the Floor Stand to be installed at an angle or incline. To avoid this, observe the following precautions.

–Do not install the Floor Stand in a place subject to direct sunlight or near a heater.

–Do not install the Floor Stand in a hot or humid place, or outdoors.

Note on use

To keep the Floor Stand clean, occasionally wipe it with a dry soft cloth. Stubborn stains may be removed by wiping with a cloth slightly dampened with mild soap. Be sure to dry the area afterwards with a dry soft cloth. Do not use chemicals, such as thinner or benzine, as they damage the finish of the Floor Stand.

4 (GB)