3 Detach the Table-Top Stand from the TV.

If your TV is not attached to the Table-Top Stand, this procedure is not necessary.

Before detaching the Table-Top Stand, disconnect all the cables from the TV.1Remove the four screws from the rear of the TV and detach the Table-Top Stand.2For KDL-46X2000, KDL-40X2000 only, remove the two screws on the rear of the TV.

Screw

Soft cloth

4 Attach the two hooks on the rear of the TV.Place the TV with its screen facing down on a stable cloth-covered work surface.Attach the supplied two hooks with the two supplied screws (+PSW6 × 16).For the following models, use the two supplied screws (+PSW5 × 16) instead:KDL-52X2000, KDL-46X2000, KDL-40X2000

Hook screw

Hook

Soft cloth

Step 4:Installing the TV

If you intend to install a TV that is not specified on page 2, be sure to refer to the leaflet supplied with your TV.

1 Attach the TV to the Floor Stand.

Referring to the hook and screw locations diagram/ table on page 12, insert the two hooks on the rear of the TV into the top portion of the holes of the Center Pillar.

Note

Be careful not to topple the Floor Stand when attaching the TV to the Floor Stand.

8 (GB)