Sony SU-FL62 Step 5:, Shelves, Attaching the Glass, 1 Attach the eight Glass Shelf Supports to the Frame, 2 Secure the TV and the Floor Stand, and attach the cable holder

2 Secure the TV and the Floor Stand, and attach the cable holder.

1Referring to the hook and screw locations diagram/ table on page 12, determine the screw holes and secure the two supplied lock screws (L) to the holes.

For the following models, use the two supplied lock screws (S):

KDL-52X2000, KDL-46X2000, KDL-40X2000

2Attach the cable holder to the rear of the Center Pillar with the two supplied screws (+PSW4 × 12).

Lock screw

Cable Holder

Screw (+PSW4 × 12)

Notes

•If the two lock screws are not used to secure the TV, it may fall and cause injury.

•When using an electric screwdriver, set the torque setting to approximately 1.5 N·m {15 kgf·cm}.

Step 5:Attaching the GlassShelves1 Attach the eight Glass Shelf Supports to the Frame.

Glass Shelf Support

Note

Insert the Glass Shelf Supports into the holes of the Frame, checking that they are parallel and level.

(Continued)

9 (GB)