This section shows you how to check, change and cancel the timer settings after you have stored them in the VCR.
Before you start...
Turn on your monitor.
1 Press TIMER to turn off the TIMER indicator in the display window.
2 Press POWER to turn on the VCR.
3 Press MENU and select 2. TIMER SET using SHIFT v, then press SHIFT b.
The TIMER SET menu appears.
| [ TIMER SET ] |
| |
DATE | START | STOP | MODE |
1 0 | 1 3:1 5 | 1 4:0 0 | SP |
MON | 0 2:0 0 | 0 3:0 0 | SP |
0 4 | 1 1:0 0 | 1 1:5 0 | SP |
0 9:0 0 | 1 0:3 0 | EP | |
– – | – | – | – – |
– – | – | – | – – |
– – | – | – | – – |
– – | – | – | – – |
4 Check the timer settings:
If you do not need to change or cancel the settings, press MENU twice, then press TIMER to return to recording standby.
5 Change or cancel the timer setting:
• To change the setting, press SHIFT vand SHIFT bto flash the item you want to change, and reset it using DATA
6 Press MENU twice.
The VCR returns to the original screen. When there are any other timer settings left in the TIMER SET menu, press TIMER to return to recording standby.
To check the timer settings during timer recording
Press MENU and select 2. TIMER SET. After checking, press MENU twice to turn off the display.
When the timer settings overlap
The VCR will not record overlapping programs. If any of your timer settings overlap, change the settings.
Case 1: If you preset two programs to start
recording at the same time...
The program listed first in the TIMER SET menu has priority over the other programs. The timer settings of lower priority programs will start recording when the VCR stops recording the higher priority program.
Case 1
Program 1 | 10:00 | 10:50 |
| ||
(listed first) |
|
|
|
|
|
Program 2 |
|
|
|
|
|
| Will be | 11:30 | |||
(listed next) |
| ||||
|
| cut off |
|
|
|
Case 2: If you preset program 1 to start recording
before program 2 is finished recording...
Program 1 will start recording after program 2 has finished.
Case 2
10:3011:30
Program 1
Will be cut off
Program 2
10:00 11:00
Note
•To cancel the setting, press SHIFT vand SHIFT bto flash the “MODE” setting of the program you want to cancel, then set it to “–
| [ TIMER SET ] |
| |
DATE | START | STOP | MODE |
1 0 | 1 3:1 5 | 1 4:0 0 | SP |
MON | 0 2:0 0 | 0 3:0 0 | SP |
– – | – | – | – – |
0 9:0 0 | 1 0:3 0 | EP | |
– – | – | – | – – |
– – | – | – | – – |
– – | – | – | – – |
– – | – | – | – – |
The VCR starts recording 15 seconds before the preset start time.
About memory
The VCR has a memory
21 (US)