If you connect the CLOCK ADJ IN/OUT terminals of the VCRs, you can adjust the clock of all the connected VCRs simultaneously in the following cases:
–when the clock of VCR 1 comes to the set time
–when you input a signal from an external switch
VCR 1
to CLOCK ADJ OUT
VCR 2 | to CLOCK ADJ IN |
|
to CLOCK ADJ OUT |
|
VCR 3 | to CLOCK ADJ IN |
When using an external switch
Connect the external switch between the CLOCK ADJ IN terminal and the GND terminal of VCR 1.
Setting the clock adjustment time
1 Press MENU and select 3.SET UP/USED TIME using SHIFT v, then press SHIFT b.
The SET UP menu appears on the screen.
2 Press SHIFT vto flash the setting of “CLOCK ADJ.”
3
[ SET UP ]
TAPE | |
END ALARM | END |
TAPE END | REW |
APC |
|
CLOCK ADJ | 0 1 : 0 0 |
BUZZER |
|
THREAD CHECK | ON |
[ USED TIME ] | |
HEAD | 00005H |
When using the clock of VCR 1:
When the clock of VCR 1 comes to the time set on “CLOCK ADJ,” the signal will be output from the CLOCK ADJ OUT terminal to adjust the clocks of all the connected VCRs.
When using an external switch:
When you turn on the switch and its signal is received at the CLOCK ADJ IN terminal of VCR 1, the clocks of all the connected VCRs will be adjusted to the time set on “CLOCK ADJ.”
4 Press MENU twice to return to the normal display.
24 (US)