Precautions

On safety

•Operate the unit on 120 V AC, 60 Hz only.

•The nameplate indicating operating voltage, power consumption, etc., is located on the rear of the unit.

•If anything falls into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further.

•Do not drop or place heavy objects on the power cord. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit with a damaged power cord.

•Unplug the unit from the wall outlet if you do not intend to use it for an extended period of time. To disconnect the cord, pull it out by the plug, never by the cord.

On installation

•Allow adequate air circulation to prevent internal heat buildup.

•Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.

•Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.

•Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

•Keep the unit and cassettes away from equipment with strong magnets, such as microwave ovens or large loudspeakers.

•Do not place heavy objects on the unit.

•If the unit is brought directly from a cold to a warm location, moisture may condense inside the VCR and cause damage to the video head and tape. When you first install the unit, or when you move it from a cold to a warm location, wait for about one hour before operating the unit.

On video cassettes

Remove and store video cassettes after recording or playback.

On cleaning

As a safety precaution, unplug the unit before cleaning it.

•To keep the unit looking brand-new, periodically clean it with a mild detergent solution. Never use strong solvents such as thinner or benzine, or abrasive cleaners since they will damage the cabinet.

When cleaning, keep liquid away from electrical contacts and connectors.

•When there is a buildup of dust on air vents, use a vacuum cleaner to remove it.

On repacking

•Before repacking, disconnect all cables and connecting cords.

•Do not throw away the carton and packing materials. They make an ideal container with which to transport the unit. When shipping the unit to another location, repack it.

On transportation

When transporting the unit, protect it from vibration and impact.

If you have any questions about this unit, contact your authorized Sony dealer.

4 (US)