Terminals

WARNING OUT terminal

The VCR outputs a signal from the WARNING OUT terminal when something wrong has happened to the VCR during recording:

–when the recording stops due to an entangled tape

–when the APC detects an improper video signal level at the start of recording

–when an improper video signal level is detected by the recording checking function

WARNING OUT terminal

GND terminal

REC mode

 

 

 

 

Output

 

 

 

 

 

5 V

signal

 

 

 

 

0 V

 

 

 

 

 

 

 

 

 

 

 

 

 

Recording stops.

To reset, press one of the

 

 

 

tape operation buttons.

EJECT IN/OUT terminals

If you connect the EJECT IN/OUT terminals of the VCRs, you can eject the tape inserted into all the connected VCRs simultaneously in the following cases:

–when you press6EJECT of VCR 1

–when you press the EJECT buttons on the RM- V200 Remote Control Unit (not supplied)

–when you input a signal from an external switch

VCR 1

to EJECT OUT

VCR 2

to EJECT IN

to EJECT OUT

VCR 3

to EJECT IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Operations Additional

When using the RM-V200 Remote Control Unit Connect the RM-V200 to the CONTROL S IN jack of VCR 1, and connect the VCRs via the CONTROL S IN and OUT jacks.

For connecting the CONTROL S IN and OUT jacks, see page 26(US).

When using an external switch

Connect the external switch between the EJECT IN terminal and the GND terminal of VCR 1.

23 (US)