Alarm Recording
You can use a door switch or alarm sensor to trigger alarm recording. You can make alarm recording in recording mode, stop mode and power off mode with the selected recording speed.
Connecting an Alarm SensorCommercially available switching box, etc.
to COM to ALARM OUT
to COM | to ALARM | |
|
| IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | 6 |
1 Turn on the power of the equipment to be used.
2 Press MENU and MENU V until “3” of the MAIN MENU flashes on the monitor screen.
3 Press MENU B.
The ALARM SET menu appears.
ALARM SET | ALARM MODE | A1 |
| ||
| ALARM SPEED | 6H |
| ALARM DURATION | 20sec |
| ALARM DATA REC | OFF |
| TAPE END WARN. | COUNTER |
| CLOG DETECTION | ON |
| SERIES REC | OFF |
| <NEXT PUSH > |
|
SELECT : | DATA SET : +/– RETURN : MENU |
4 Press MENU V to move the flashing to the setting of ALARM SPEED and set it by pressing MENU + or
ALARM SET | ALARM MODE | A1 |
| ||
| ALARM SPEED | 6H |
| ALARM DURATION | 20sec |
| ALARM DATA REC | OFF |
| TAPE END WARN. | COUNTER |
| CLOG DETECTION | ON |
| SERIES REC | OFF |
| <NEXT PUSH > |
|
SELECT : | DATA SET : +/– RETURN : MENU |
Set ALARM SPEED to 6H, 18H or NC by pressing MENU + or
6H: for recording in
18H: for recording in
NC: for recording at the same speed as before the alarm was received.
When TAPE in the GENERAL SET menu is set toSet ALARM SPEED to 8H, 24H or NC by pressing MENU + or
8H: for recording in
24H: for recording in
NC: for recording at the same speed as before the alarm was received.
33