Precautions
On safety•Operate the unit on 120 V AC, 60 Hz only.
•The nameplate indicating operating voltage, power consumption, etc., is located on the rear of the unit.
•Should any solid object or liquid fall into the cabinet, turn off the power, unplug the unit and have it checked by qualified personnel before operating it any further.
•Do not drop or place heavy objects on the power cord. If the power cord is damaged, turn off the power immediately. It is dangerous to use the unit with a damaged power cord.
•Connect the power cord to the wall AC outlet.
For connecting the power source, see “Connecting a Camera, Monitor and Microphone” on page 8.
•Unplug the unit from the wall outlet if it is not to be used for several days or more.
•Disconnect the power cord from the wall AC outlet by grasping the plug, not by pulling the cord.
If the unit is brought directly from a cold to a warm location, moisture may condense on the video head drum. In this condition, the tape may adhere to the head drum and cause serious damage to the head. To avoid damage caused by moisture condensation, be sure not to leave a cassette inside the compartment when the unit will not be used. If moisture condensation is present, the “dddd” indicator flashes in the display window and the
unit will not operate. When the “dddd” indicator
disappears, you can operate the unit.
On video cassettesRemove and store video cassettes after recording or playback.
•Do not place a heavy object on the unit.
•Allow adequate air circulation to prevent internal heat
Do not place the unit on surfaces (rugs, blankets, etc.) or near materials (curtains, draperies) that may block the ventilation slots.
•Do not install the unit in a location near heat sources such as radiators or air ducts.
•Place the unit to avoid direct sunlight.
•Do not install the unit in a place subject to mechanical vibration or shock.
•Do not put magnetic objects close to the unit and cassette tape. Magnetic fields may affect the color reproduction of the unit and cause distortion.
•The unit is designed for operation in a horizontal position.
Do not install it in an inclined position.
On operationWhen the unit is not in use, turn the power off to conserve energy and to extend its life.
As a safety precaution, unplug the unit before cleaning it.
•To keep the unit looking
When cleaning, keep liquid away from electrical contacts and connectors.
•When there is a buildup of dust on air vents, use a vacuum cleaner to remove it.
On repacking•Before repacking, disconnect all cables and connecting cords.
•Do not throw away the carton and packing materials. They make an ideal container with which to transport the unit. When shipping the unit to another location, repack it.
On transportationWhen transporting the unit, protect it from vibration and impact.
If you have any questions about this unit, contact your authorized Sony dealer.
4