When the personal computer is connected to the RS- 232C or
1 Select the
2
3 Press MENU and MENU V until “4” of the MAIN MENU flashes on the monitor screen.
4 Press MENU B.
The GENERAL SET menu appears.
GENERAL SET | ||
TAPE | MODE | |
TAPE IN | STOP | |
TAPE END | MODE | REW |
TAPE USED COUNT | OFF | |
CLOCK ADJUST | 0 1 : 0 0 | |
APC |
| ON |
THREAD CHECK | OFF | |
T/D SEARCH | CONVENTION | |
BAUD RATE | 19200 | |
| <NEXT PUSH | > |
SELECT : | DATA SET : +/– RETURN : MENU |
5 Press MENU V to move the flashing to BAUD RATE and set the baud rate (19200, 2400, 4800 or 9600 bps) by pressing MENU + or
APC |
| ON |
THREAD CHECK | OFF | |
T/D SEARCH |
| CONVENTION |
BAUD RATE |
| 1 9 2 0 0 |
<NEXT PUSH | > | |
SELECT : | DATA SET : | +/– RETURN : MENU |
6 Press SEARCH to return to the normal display.
11