Getting Started

Connecting to bi-wire system speakers

Since the two pairs of speaker terminals on your amplifier, SPEAKERS A and B, can provide simultaneous speaker output, you can use them to connect a bi-wire speaker system. To drive both speaker systems simultaneously, set SPEAKERS to A+B.

To select the speaker system A or B

Set SPEAKERS to A or B. To drive both speaker systems simultaneously, set SPEAKERS to A+B.

Note

Use speakers with a nominal impedance of 4 to 16 ohms. When outputting at the same time to two speaker systems, use speakers with a nominal impedance of 8 to 16 ohms.

Mains Lead Hookups

Connecting the mains lead

Connect the mains lead from this amplifier and from your audio/video components to wall outlets.

zYou can power other components through AC OUTLET on the amplifier

By connecting other audio components to AC OUTLET on the amplifier, you can supply power to the connected components through the amplifier and turn them all on or off when you turn the amplifier on or off.

Caution

Make sure that the total power consumption of all components connected to the outlets on the amplifier does not exceed 100 watts. Do not connect electrical home appliances such as an electric iron, fan, TV, or other high- wattage appliances to these outlets.

Note

Separate the mains lead, audio connecting cords and speaker cords. Noise or sound deterioration may occur when audio connecting cords are in contact with the mains lead, or when the mains lead or speaker cords are placed near the tuner’s loop aerial or aerial wire.

6GB