Sony TA-VE700 Precautions, On safety, On power sources, On placement, On operation, On cleaning

WARNING

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

Do not install the appliance in a confined space, such as a bookcase or build-in cabinet.

Precautions

On safety

•Should any solid object or liquid fall into the cabinet, unplug the amplifier and have it checked by qualified personnel before operating it any further.

On power sources

•Before operating the amplifier, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the amplifier.

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.

•If you are not going to use the amplifier for a long time, be sure to disconnect the amplifier from the wall outlet. To disconnect the mains lead, grasp the plug itself; never pull the cord.

•AC power cord must be changed only at the qualified service shop.

•The mains switch is located on the front exterior.

If you have any question or problem concerning your amplifier, please consult your nearest Sony dealer.

On placement

• Place the amplifier in a location with adequate ventilation to prevent heat build-up and prolong the life of the amplifier.

• Do not place the amplifier near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

• Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.

On operation

• Before connecting other components, be sure to turn off and unplug the amplifier.

On cleaning

• Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

2EN