Attaching the pedestal to TV
■Assembling the pedestal | Accessories |
Fix securely with assembly screws A . (Total 4 screws) | |
•• Tighten screws firmly. | Assembly screws (4 of each) |
A | A |
|
| Make sure that the bracket is | XSS5+15FNK |
Bracket | size (M5 × 15) | |
anchored before fixing the screws. | B | |
|
| |
Front |
| XYN4+F25FJK |
|
| size (M4 × 25) |
| Bracket (1) |
Base | TBL5ZA32261 |
TBL5ZA32591 | |
(Image) | TBL5ZA32821 |
|
|
Tighten assembly screws B (total 4 screws) loosely at first, then |
|
• tighten them firmly to fix securely. |
|
Rear view |
|
Getting started •
B
Rear side
Arrow mark
| Arrow | |
| mark | |
Base | Hole for pedestal | |
installation | ||
| ||
| bracket | |
(Image) | Work on a flat surface |
Base (1)
TBL5ZX0278
Accessories/Optional Accessory
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall hanging bracket or repacking the TV.
Remove the assembly screws B from the TV.
Lift the TV from the pedestal.
Remove the assembly screws A from the bracket.
WARNING
•Otherwise the TV may fall over and become damaged, and personal injury may result.Do not disassemble or modify the pedestal.
Caution
•Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic Dealer immediately.Do not use any pedestal other than that provided with this TV.
•If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.During
When removing the pedestal, do not remove the pedestal by any methods other than the specified procedure
•Otherwise the TV and/or pedestal may fall over and become damaged, and personal injury may result.(above).
9
