Advanced Recording Operations

Synchro-recording With a CD Player Using a Remote Z

By pressing the START button on the optional remote RM-J910/J710 (not supplied), you can perform Synchro-recording on your tape deck with a Sony CD player. This function is possible only with Sony CD players with remote control capability.

Note

Use the B deck buttons on the RM-J910.

RM-J910 (for TC-RE340 only)

6Press START.

To stop Synchro-recording

Press STOP.

zWhen ª lights up in Step 5 (TC-RE340 only)

Press · once to reverse the direction before proceeding to Step 6.

zIf your CD player has the Peak Search function

After performing Steps 1 to 3 above, press PRESET to turn on the Auto Rec Level function (see page 10). Then continue from Step 4 (RM-J910 only).

zYou can use the remote to operate the CD player

To start CD play, press P twice; to pause CD play, press P once; to locate a CD track, press =or +.

START PRESET

STANDBY STOP

RM-J710 (for TC-KE240 only)

START

STANDBY STOP

1Set the source selector on the amplifier to CD player.

2Insert a CD into the CD player and select the play mode (CONTINUE, SHUFFLE, or PROGRAM) of the CD player.

3Insert a cassette.

4Select the side(s) to be recorded on (TC-RE340 only).

To record on

Set DIRECTION MODE to

Only one side

A

 

 

Both sides

Åor a

 

 

5Press STANDBY.

The CD player changes to play pause and the tape deck to recording pause.

To record on the reverse side

Press ª(RM-J910 only) once.

Note

Some CD player might not start playback when you press START. In this case, press P on the CD player to start playback.

13GB