Sony DCR-TRV, DCR-TRV16, DCR-TRV18, DCR-TRV25, DCR-TRV27, TRV18, TRV25TRV27 Dubbing only desired scenes, –Digital program editing (on tapes), Step 1: Connecting the VCR, Step, Step, Step, Note, Operation, Operation

Dubbing only desired scenes–Digital program editing (on tapes)

You can duplicate selected scenes (programs) for editing onto a tape without operating the VCR.

Scenes can be selected by frame. You can set up to 20 programs.

Your camcorder can dub on “Memory Stick”s (except DCR-TRV16). See page 132 for more information.

Unwanted scene Unwanted scene

Switch the order

Before operating the Digital program editing on tapes recorded on other equipment

Step 1 Connecting the VCR (p. 78).

Step 2 Setting the VCR for operation.

–Using the A/V connecting cable (p. 79)

–Using the i.LINK cable (DV connecting cable) (p. 83) Step 3 Adjusting the synchronization of the VCR (p. 84).

When you dub using the same VCR again, you can skip steps 2 and 3.

Using the Digital program editing function on tapes recorded on other equipment

Operation 1 Making a program (p. 86).

Operation 2 Performing the program (dubbing a tape) (p. 88).

Note

When editing digital video on tapes, the operation signals cannot be sent with LANC.

Step 1: Connecting the VCR

You can connect both the A/V connecting cable and the i.LINK cable (DV connecting cable).

When you use the A/V connecting cable, connect the devices as illustrated on page 75. When you use the i.LINK cable (DV connecting cable), connect the devices as illustrated on page 76.

If you connect using the i.LINK cable (DV connecting cable)

With a digital-to-digital connection, video and audio signals are transmitted in digital form for high-quality editing.

78