Sony DCR-TRV, DCR-TRV16, DCR-TRV18, DCR-TRV25, DCR-TRV27, TRV18, TRV25TRV27 (1) Set the IR SETUP code, Dubbing only desired scenes – Digital program editing (on tapes), Step 2: Setting the VCR to operate with the A/V connecting cable

Dubbing only desired scenes – Digital program editing (on tapes)Step 2: Setting the VCR to operate with the A/V connecting cable

To edit using the VCR, send the control signal by infrared rays to the remote sensor on the VCR.

When you connect using the A/V connecting cable, follow the procedure below, (1) to (4), to send the control signal correctly.

(1) Set the IR SETUP code

1Set the POWER switch to VCR on your camcorder.

2Turn the power of the connected VCR on, then set the input selector to LINE. When you connect a video camera recorder, set its power switch to VCR/VTR.

3Press MENU. Select VIDEO EDIT in with the SEL/PUSH EXEC dial

(p. 184).

4Turn the SEL/PUSH EXEC dial to select TAPE, then press the dial. (except DCR-TRV16)

5Turn the SEL/PUSH EXEC dial to select EDIT SET, then press the dial.

6 Turn the SEL/PUSH EXEC dial to select CONTROL, then press the dial.

7 Turn the SEL/PUSH EXEC dial to select IR, then press the dial.

8 Turn the SEL/PUSH EXEC dial to select IR SETUP, then select IR SETUP code of your VCR, then press the dial. Check the code in “About IR SETUP code.” (p. 80)

MENU

3			6
OTHERS	OTHERS		VIDEO EDIT	0:08:55:06
DATA CODE	DATA CODE		EDIT SET
BEEP	BEEP		CONTROL	IR
COMMANDER	COMMANDER		ADJ TEST	i. LINK
DISPLAY	DISPLAY		”CUT–IN”
VIDEO EDIT READY	VIDEO EDIT	RETURN	”CUT–OUT”
RETURN	RETURN	TAPE	IR SETUP
		MEMORY	PAUSEMODE
			IR TEST
[MENU] : END	[MENU] : END		RETURN
			[MENU] : END

4								8
	OTHERS			VIDEO EDIT			0:08:55:06		VIDEO EDIT		0:08:55:06
		DATA CODE		MARK		1	IN		EDIT SET
		BEEP		UNDO
										CONTROL
		COMMANDER		ERASE ALL
										ADJ TEST
		DISPLAY		START						”CUT–IN”
		VIDEO EDIT	RETURN	EDIT SET						”CUT–OUT”
		RETURN	TAPE		0:00:00:00					IR SETUP	3
			MEMORY	TOTAL
										PAUSEMODE
				SCENE 0
										IR TEST
	[MENU] : END			[MENU] : END						RETURN
									[MENU] : END

Editing

5

VIDEO EDIT	0:08:55:06	VIDEO EDIT	0:08:55:06
MARK		EDIT SET
UNDO		CONTROL	IR
ERASE ALL		ADJ TEST
START	IR	”CUT–IN”
EDIT SET		”CUT–OUT”
TOTAL 0:00:00:00		IR SETUP
		PAUSEMODE
SCENE 0		IR TEST
[MENU] : END		RETURN
		[MENU] : END

79