Sony TRV19, TRV22, TRV33 Ejecting the “Memory Stick”, Inserting the “Memory Stick”

Inserting/Ejecting the “Memory Stick”

Inserting the “Memory Stick”

Open the lid of the “Memory Stick” slot. Insert the “Memory Stick” in the “Memory Stick” slot as far as it can go with the b mark as illustrated, then close the lid.

MEMORY EJECT Access lamp

Ejecting the “Memory Stick”

Open the lid of the “Memory Stick” slot. Slide MEMORY EJECT in the direction of the arrow.

Notes

•If you insert the “Memory Stick” forcibly in the opposite direction, the “Memory Stick” slot may be damaged.

•Do not insert anything other than the “Memory Stick” into the “Memory Stick” slot. This may cause a malfunction.

While the access lamp is lit or flashing

Do not shake or strike your camcorder because your camcorder is reading the data from the “Memory Stick” or recording the data on the “Memory Stick.” Do not turn the power off, eject the “Memory Stick” or remove the battery pack. Otherwise, image data breakdown may occur.

If “ MEMORY STICK ERROR” appears

Reinsert the “Memory Stick” a few times. The “Memory Stick” may be damaged if the indicator still appears. If this occurs, use another “Memory Stick.”

only) TRV22/TRV33-(DCR Operations Stick” “Memory

109