Sony TRV19, TRV22, TRV33 manual 86

Dubbing only desired scenes – Digital program editing (on tape)

(11) Select PAUSEMODE, then press EXEC.

(12) Select the mode to cancel recording pause on the VCR, then press EXEC. The correct button depends on your VCR.

Refer to the operating instructions of your VCR.

11

V I DEO ED I T					END
	ED I T SET
	CONTROL
	ADJ TEST
	”CUT - I N”
	”CUT -OUT”
	I R SETUP	PAUSE
	PAUSEMODE	REC
	I R TEST	PB
			EXEC	RET.

12

V I DEO ED I T				END
	ED I T SET
	CONTROL
	ADJ TEST
	”CUT - I N”
	”CUT -OUT”
	I R SETUP
	PAUSEMODE	PAUSE
	I R TEST
			EXEC	RET.

(13) Locate the infrared rays emitter of your camcorder and face it towards the remote sensor of the VCR about 30 cm (12 in.) apart.

Infrared
rays emitter	VCR

Remote sensor

(14) Insert a recordable tape into the VCR, then set the VCR to recording pause.

(15) Select IR TEST, then press EXEC.

(16) Select EXECUTE, then press EXEC.

If the VCR starts recording, the setting is correct.

The indicator you selected to cancel recording pause on the VCR flashes on the screen. When finished, the indicator changes to COMPLETE.

15

16

V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT”

I R SETUP

PAUSEMODE

I R TEST

END

ENGAGE

REC PAUSE

RETURN

EXECUTE

EXEC RET.

V I DEO ED I T ED I T SET CONTROL ADJ TEST ”CUT - I N” ”CUT -OUT”

I R SETUP

PAUSEMODE

I R TEST

END

COMPLETE

EXEC RET.

86