Sony TRV19, TRV22, TRV33 Step 1: Connecting to the VCR, Using Digital program editing on the tape recorded on other equipment

Dubbing only desired scenes

– Digital program editing (on tape)

You can duplicate selected scenes (programs) for editing onto the tape without operating the VCR.

Scenes can be selected by frame. You can set up to 20 programs.

Your camcorder can dub on the “Memory Stick” (DCR-TRV22/TRV33 only). See page 130 for details.

Unwanted	Unwanted
scene	scene

Switch the order

Before operating Digital program editing on the tape recorded on other equipment

Step 1 Connecting to the VCR.

Step 2 Setting the VCR to operate (p. 85).

Step 3 Adjusting the synchronization of the VCR (p. 88).

When you dub using the same VCR again, you can skip steps 2 and 3.

Using Digital program editing on the tape recorded on other equipment

Operation 1 Making a program (p. 90).

Operation 2 Performing Digital program editing (Dubbing the tape) (p. 92).

Note

When editing digital video, the operation signals to the VCR cannot be sent with LANC jack.

Step 1: Connecting to the VCR

You can connect either the A/V connecting cable or the i.LINK cable.

Connect the devices as illustrated on page 81.

84