3 Remove any slack from the ink ribbon.

Note

If the ribbon is left slack, it may be damaged when inserted.

Operation

Wind the spools in the

direction of the arrow until the Start position marker start position marker appears

as illustrated.

4 Load the new ink ribbon into the ink ribbon compartment.

Insert the hole of the handle of the ink ribbon over the protruberance of the printer.

while you are printing or cleaning the internal thermal head.

Push the point marked “PULL OPEN”.

When storing ink ribbon cartridge:

•Avoid placing the ink ribbon in a location subject to:

–high temperatures

–high humidity

–excessive dust

–direct sunlight

•Store a partially used ink ribbon in its original packaging.

If your ink ribbon should tear

Repair the tear with transparent tape. There should be no problem with using the remaining portion of the ribbon.

Transparent tape

Turn the spools in the direction of the arrow to remove any slack until the transparent tape cannot be seen.

5 Close the front panel by pushing the point marked with “PULL OPEN”.

Note

Be sure to close the front panel completely. If you do not, a paper jam or a malfunction may occur

10 Before Printing