Started Getting

Installing the Printer Driver

Install the printer driver provided with the printer. For detailed instructions on how to install the printer driver, refer to the Readme.txt file on the printer driver installer disc.

About USB (Universal Serial Bus) Specification Revision 2.0

•The UP-D23MD complies with the USB 2.0 specification.

•USB 2.0 is a newer standard than USB 1.1, but provides backward compatibility.

•USB 2.0 supports Hi-speed USB, in addition to the existing Full (Low) speed.

•The UP-D23MD can be connected as Full-speed in a USB 1.1 environment. However, to use the UP- D23MD with Hi-speed USB functions in a USB 1.1 environment, the following requirements must be met.

–Computer

A computer which supports Hi-speed USB (conforming to the USB 2.0 specification) a)

–OS Windows2000/XP b)

–USB 2.0 device driver

USB 2.0 device driver produced by Microsoft Corporation. (Operation using USB 2.0 drivers other than ones produced by Microsoft Corporation is not guaranteed.)

–USB 2.0 cable

Use the 2-m cable supplied with the UP-D23MD.

a)Operations of all of devices which conform to USB 2.0, or all USB 2.0 extension boards/extension cards cannot be guaranteed.

b)If your OS is Windows98/ME, up to Full-speed USB is supported.

Note

When the UP-D23MD is connected to the computer with the power turned on, do not turn your computer to standby mode (suspend status) or in pause mode. Doing so may cause a malfunction of the operation.

8 Installing the Printer Driver