Indicators |
| Possible cause and | |
|
| remedies | |
Lighting | Blinking | ||
| |||
|
|
| |
ALARM |
| • The front panel is open. | |
|
| tClose the front door | |
|
| surely. | |
|
| • Paper has jammed inside the | |
|
| printer. | |
|
| tRemove any jammed | |
|
| paper from the printer. | |
|
| (See page 18.) | |
|
| • The maximum number of | |
|
| printouts has accumulated | |
|
| on the paper tray. | |
|
| tRemove the printouts. | |
|
| Printing starts again. | |
|
|
|
Miscellaneous
If the Paper Jams
If the ALARM indicator lights on the front panel, or the message “Paper jam. Printing is aborted. Please remove the jammed paper and print again.” or “Motor or sensor trouble. Printing is aborted after you press the PRINT button and during printing. Please turn off the printer, then turn it back on and print again.” appears on a monitor of a computer during printing after you press the PRINT button, the paper may have jammed inside the printer.
Remove the jammed paper according to the process described below.
Note
If you turn off the power of the printer, any images stored in memory will be lost. After you finishing the following operations and turning on the printer on again, recapture the image into memory,
1 Remove the paper tray.
If any printouts have been ejected onto the paper tray and have accumulated on the paper tray, remove them before removing the paper tray.
2 Check whether any paper is jammed inside the printer. If you find a jammed sheet, slowly pull it straight out.
18 If the Paper Jams