To prevent them from being pushed, attach the supplied stopper as illustrated.
Operation | Insert the edge of the paper tray into this groove. |
|
v
Note
Do not leave more than 10 sheets of ejected printouts on the paper tray. Doing so may cause a paper jam.
Printing
Before printing•Ensure that the printer is properly connected to the computer.
•Ensure that the ink ribbon and paper are properly loaded.
•Ensure that the printer driver has been installed.
POWER indicator
PRINT indicator
ALARM indicator
RIBBON indicator
PAPER indicator
1
1 Press the POWER switch to turn the printer on. The POWER indicator lights.
PRINT, ALARM, RIBBON and PAPER indicators light at the same time, then all of them go out.
Notes
•Turn the printer on first.
•Do not turn the computer off and on while it is accessing a hard or floppy disk.
2 Turn on the power of the computer.
3 Execute the print job with software application. While the printer is receiving the image data from the computer, the PRINT indicator blinks.
While the printer is printing, the PRINT indicator lights.
Note
•Do not turn off the power during printing. If you do so, paper may not be ejected and may jam in the printer.
•Do not pull the paper out till the printer finishes printing.
•You can make multiple copies of identical printouts. However, the printer may stop printing for various reasons. In such a case, remove the printouts
12 Printing