4 Load the cleaning ribbon.

For details on how to load the cleaning ribbon, see steps 2 and 3 of “Loading the Ink Ribbon and Paper” on page 13.

IC board

Note

If there is any slack in the cleaning ribbon after it is placed in the tray, take up the slack by turning the spool in the direction indicated by the arrow in the following figure.

Miscellaneous

Direction to turn spool

5 Insert the media tray into the printer. When the printer finishes initializing, the CLEANING indicator flashes and cleaning starts automatically.

When cleaning is completed, the CLEANING indicator turns off.

6 Make sure that the printer is not performing an operation, and then pull out the media tray.

7 Remove the cleaning ribbon.

8 Load the ink ribbon.

9 Insert the media tray into the printer.

Notes

•Store the cleaning ribbon in a location without dust (such as in a bag).

•Place the removed media tray on a stable surface when loading and removing the cleaning ribbon.

•Dropping the media tray while paper is loaded may result in an injury. When pulling out and inserting the media tray, hold the handle part with one hand and support the media tray from the bottom with the other hand, while making sure both of your hands are securely holding the media tray.

Ink Ribbon and Paper

Laminate Color Printing Pack UPC-R80MD Contains two color ink ribbons and two rolls of paper (A4- size width).

Laminate Color Printing Pack UPC-R81MD Contains two color ink ribbons and two rolls of paper (Letter size width).

Printable quantity

The number of printouts that can be made with a single set of ink ribbon and paper is shown below.

Printing pack

UPC-R80MD

UPC-R81MD

Number of sheets

50 sheets

50 sheets

 

 

 

Print size

A4

Letter

 

 

 

Notes

•Do not change the ink ribbon and paper roll when they are only partially used. Doing so can cause problems. The number of printouts indicated above is not quarantined.

•When the ink ribbon is used up, replace both the ink ribbon and the paper roll.

20 Ink Ribbon and Paper