The indicators are as shown below:
Rear
Lights while cleaning is in progress.
BRIBBON/PAPER indicatorLights when an error involving the ink ribbon or paper occurs.
CALARM indicatorLights when an error such as a paper jam occurs.
DPRINT indicatorLights while printing is in progress.
The location and cause of an error can be determined according to which of the indicators (PRINT, ALARM, RIBBON/PAPAER and CLEANING) are on or flashing. For details, refer to “Explanation of Indicators” on page 23.
HSTOP button (page 17)Press this button to stop a continuous printing operation.
When this button is pressed, the printer returns to ready state after the current page is printed and ejected.
USB connectorConnects to a computer equipped with the USB interface (which conforms to USB 2.0), using a USB cable (supplied).
B
Equipotential ground terminal connector Used to connect to a ground (equipotential) plug to bring the various parts of the system to the same potential.
D~AC IN connector (page 10) Use the power cord provided.
ESecurity slotUsed to attach a security cable.
FUSB cable stopper (page 10)Fixes the USB cable to prevent it from being disconnected.
Introduction
Location and Function of Parts and Controls | 9 |
|
|