Preparation

Supplied Accessories

Make certain you have received the following accessories.

Caution

The UP-GR700 is very heavy. The printer should be carried by two persons. Be careful when taking the printer out the shipping box.

Feet (2)

CD-ROM (including the operating instructions and printer driver) Before Using this Printer (1) Software License Agreement (1) Warranty Card (1)

Note

The packaging materials are needed when transporting the printer, so we suggest you keep them.

Installing the Printer

Before setting up the unit and using it, be sure to perform the following installation.

Placing the Printer

Check the location where the printer is to be installed. A space of about 25 cm (9 7/8 inches) is required as illustrated, so that ejected printouts will not be dropped on the floor.

About 25 cm (9 7/8 inches)

When the printer is unstable

If the printer is unstable when you open the front door, attach the two feet (supplied) to the printer.

1 Insert the one foot along the rail located on one side of the bottom of the printer.

Preparation

RailFoot

Supplied Accessories / Installing the Printer

7