• Stand the paper roll up vertically. If you place the
Operationpaper roll horizontally, the paper roll may roll around and fall. This may cause an injury.
Loading the Paper Roll and Ink Ribbon
Recommended printing pack
The following printing pack is made especially for the
Be sure to use the ink ribbon and the paper roll in the carton as a set.
2UPC-R710 Self-Laminating Color Printing Pack
Ink ribbon for printing: 2
Paper roll: 2 rolls
One set of the ink ribbon and paper roll allows you to print about 170 printouts of 203 × 254 mm size (8 × 10 inch size).
You can make printouts of either 203 × 254 or 203 × 305
mmsize (8 × 10 or 8 × 12 inch size) using the 2UPC- R710
You can select the desired size for your printouts using the printer driver.
For detailed information, refer to the instructions for the printer driver included on the
Note
When you make only 203 × 254 mm size (8 × 10 inch size) printouts, one set of the ink ribbon and paper roll allows you to print about 170 printouts. However, if you make printouts of 203 × 305 mm size (8 × 12 inch size) too, using the same roll of ink ribbon, the total number of printouts will decrease. Also, some portion of the ink ribbon may be left over. Do not use this
Notes on handling the paper roll and ink ribbon
•One set of the ink ribbon and paper roll allows you to print about 170 printouts of 203 × 254 mm size (8 × 10 inch size). Do not replace the printing pack if it has only been partially used. The number of printouts that can be printed may not be guaranteed if you replace the ink ribbon and paper before they have run out.
•We recommend that you put on gloves when handling the paper roll.
•Hold the paper roll with both hands so that you do not drop it, because it is heavy. Dropping it may cause in an injury.
Hold the paper roll with both hands.
Loading the Paper Roll and Ink Ribbon
When you use the printer for the first time, load the paper roll and ink ribbon.
If the paper roll or the ink ribbon runs out while printing is in progress, replace both paper roll and ink ribbon at the same time. When you replace the used up paper roll and ink ribbon with the new ones, you have to remove the old ink ribbon and paper roll first.
For detailed information on how to remove the paper roll and ink ribbon, see “Removing the Ink Ribbon and Paper Roll” on page 14.
When using the printer for the first time
When you use the printer for the first time, be sure to remove packing materials put in the printer before loading the paper roll and ink ribbon.
Operation
Loading the Paper Roll and Ink Ribbon | 9 |
|
|