∙
Check the volume settings on your computer speakers.
∙
Check the master volume setting in the Audio Mixer.
∙
Verify that your DVD player's mute feature is turned off.
∙
Install your CD or DVD software according to the manufacturer's instructions.
∙
Verify that the disc is in the tray with the label side facing up.
∙
After inserting your optical disc, wait a few seconds for it to be detected before trying to access it.
Select "I/O Device Configuration" and press Enter.
Select the Advanced tab from the Setup Utility screen.
When the Sony screen displays, press the F2 key on your keyboard.
Click Start in the Windows taskbar and select Turn Off Computer. Select Restart.
∙ If your drive reads some DVDs or CDs, but not others, check the shiny side of the disc for dirt or scratches. You may also need to clean the disc drive lens with an appropriate cleaner.
Note:
To recover the CD or DVD software applications that are preinstalled on your computer, see To Use the Application Recovery CD(s) for more information.
I cannot play a DVD.
If a region code warning appears when you are using the DVD player application, it may be that the region code of the DVD you are trying to play is incompatible with the region code setting of your optical drive. A region code is listed on the disc packaging. Region code indicators such as "1" or "ALL" are labeled on some DVDs to indicate the type of player that can play the disc. Unless a "1" or "ALL" appears on the DVD or on its packaging, you cannot play the disc on this system.
If you hear audio but cannot see video, your computer's video resolution may be set too high. To improve video resolution, verify that your screen area is set to 1024 x 768, using 32-bit color (preset factory default). To check your video resolution, see the Troubleshooting topic, How do I change the video resolution of my display?
Note:
If your video card utilizes system memory, you may improve video resolution by changing your screen area to 800 x 600, using 16-bit color. See your Specifications sheet for details about your computer's video RAM.
If you see video but cannot hear audio, check all of the following:
Note:
You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options using the directional arrow keys.
6. Select the desired setting displays, and press Enter.
7. Press the F10 key to Save and Exit.
My optical drive tray does not open. Use the Eject button
1. Make sure the computer is turned on.
2. Press the Eject button on the drive. Use the My Computer icon
1. Click Start in the Windows taskbar, then select My Computer.
2. Right-click the appropriate optical drive icon.
3. Select Eject from the shortcut menu.
Note:
Avoid using adhesive labels to identify your CD media. Adhesive labels may come off while the CD media is in use in your optical drive(s) and may cause damage to the unit.
I cannot play a DVD or CD.
1.
2.
3.
4.
5. Use the arrow keys to highlight Parallel Port Mode and press Enter.
Page 48
